High-speed CNC engraving and milling machine is essential for maintenance after use

High-speed CNC engraving and milling machine is essential for maintenance after use

High-speed CNC engraving and milling machine, as its name implies, can be carved or milled. On the basis of the engraving machine, the power of the spindle and servo motor is increased, and the bearing capacity of the machine bed is maintained. High speed CNC engraving and milling machine is a kind of CNC machine tool widely used in industrial automation. For different processing, it also needs to perform the self-maintenance function of the machine tool. Therefore, our maintenance after using high speed CNC engraving and milling machine is Essential factor.

1. First of all, the maintenance work of high-speed CNC engraving and milling machine should start from the initial installation. Here is the cleaning work of the machine tool and the protection of the shaft guide before the installation.

2. Daily maintenance is an important part of maintenance work. Every day in the working environment is clean, the machine is tidy, and the machine is normal when all aspects of the machine are started. In use, attention should be paid to the timely opening of the cutting fluid. After the work is completed, the workpiece waste on the machine must be cleaned. In addition, the machine must be refueled in time according to the regulations during the operation.

3. Regular maintenance is an indispensable factor for high-speed CNC engraving and milling machines. Periodic maintenance of high-speed CNC engraving and milling machines is about to be carried out once every two or three months. This maintenance requires thorough inspection and cleaning of the machine tools and the machine tools. Inspection of performance.

In the operation of high-speed CNC engraving and milling machine, care must be taken to prevent chips, abrasive particles, or cutting fluid from scattering on the surface of the guide rail, otherwise the wear of the guide rail, abrasion and rust will be caused. For this reason, pay attention to the usual inspection of the rail protection equipment to ensure the protection of the rail.

光滑 The guide rail is smooth, reducing friction resistance and friction wear to prevent low speed 匍匐 and reduce temperature rise at high temperature. As for the sliding guide, smooth oil is used; for the rolling guide, smooth oil or smooth grease can be used. The oil smoothness of the guide rail is generally selected as active smooth. We should pay attention to check the shunt valve in the active smoothing system during operation. If it fails, the guide rail cannot be actively smoothed.

It is necessary to check the amount of oil in the smooth oil tank of the guide rail every day. If the amount of oil is not enough, you should increase the amount of smooth oil in a timely manner. At the same time, pay attention to check whether the smooth oil pump can be started and stopped on time. Provides smooth oil.

So the maintenance of high-speed CNC engraving and milling machine is also performed every day at the beginning of the installation. Although it may be troublesome, it is usually necessary to pay attention to the details and solve it. It is easy to do these maintenance.